Sheet 01ServicesRandom Lake, Wisconsin

Generator service in Random Lake.

Yes, we do generator electrical work in Random Lake, where our shop is: standby generator installation, transfer switches, and a safe way to connect a portable generator to your house.

One-line · standby generatorNTS
UTILITYkWhMETERSERVICEMAIN 2PATSTRANSFERSWITCH2PGGENERATORNATURAL GAS / LPPANEL BUSHOUSE CIRCUITS
When the utility drops, the transfer switch moves the house to the generator on its own, and back again.

The projectSheet 02

What the work involves

A generator has to be connected through a transfer switch or an approved interlock so it can never feed power back onto the utility lines. That is the electrical side of generator work, and it is what we do: we wire standby generators and their transfer switches, install inlets and interlocks for portable generators, and find out why a transfer switch or hookup is not working the way it should.

Around Random Lake, the usual goal is keeping the well pump, furnace, refrigerator and a few lights running through an outage. We start by choosing which circuits matter to you, then size the transfer switch or interlock to match. For a standby unit we also plan the location, the wiring run and the connection to your panel. We pull the permit when one is required and coordinate the inspection.

Scope · panel scheduleSheet 03

Included in the work

  • Choosing the circuits you want on backup power
  • Standby generator wiring and transfer switch installation
  • Inlet box and panel interlock for a portable generator
  • Diagnosing a transfer switch or generator hookup that is not working
  • Permit and inspection when one is required
  • Walking you through how to switch over safely

Sequence of operationSheet 04

From assessment to inspection

  1. Seq 1

    Decide what stays on

    We go through the well, furnace, fridge and whatever else matters in your home.

  2. Seq 2

    Pick the connection

    A transfer switch or an interlock and inlet, sized to your generator and panel.

  3. Seq 3

    Install and wire

    We mount the equipment and make the connections at the panel.

  4. Seq 4

    Test the switch-over

    We run a switch-over test and show you how it works.

Field notes, written by customersSheet 05

“Knowledgeable and attentive to detail.”
Erik L., on Google

Google rating

4.8

Out of 5, from 117 reviews on our Google Business Profile.

Family-owned, licensed and insured electrical contractor serving Southeast Wisconsin since 2013.

RelatedSheet 06

Last connectionSheet 07

Close the circuit.

One call reaches us in Random Lake. Tell us the job and the town; we’ll take it from there.

Mon–Fri · 8 a.m.–4 p.m.Random Lake, WI 53075Prefer a callback? Request oneRequest an estimate